777 MARITIME DRIVE | P.O. BOX 308 PORT WASHINGTON, WI 53074 USA WWW.ULTRATECHPIPE.COM 1-262-284-7800 | 1-800-626-8243 UT ‐ SALES@ULTRATECHPIPE.COM
ULTRA 600 PROPERTIES Ultra 600 Induction Hardened pipe shall have the following properties:
ID hardness 50 – 65 HRc OD hardness 14 – 32 HRc Chemical properties as specified in UT100 Specification Dimensional properties: Induction ‐ hardening alters the microstructure of steel and may result in an outside diameter up to 1% larger than that specified by ASTM A53 Grade B
Minimum tensile strength of 90,000psi (620 MPa) Minimum yield strength of 60,000psi (413 MPa) Temperature Limits: 20°F to 450°F ( ‐ 6°C to 232°C)
Note: Hardness profile of ULTRA 600 is tapered, and these tensile and yield properties are of complete cross section. Therefore, these strength values will decrease as the hardened inner layer is worn away over its lifecycle.
Applicable use of Ultra 600:
Industrial:
Mining:
Steel mills Grain handling Cement mill Wastewater Foundries Wood Processing
In plant piping Tailings lines Copper Silver Gold Nickel Pulverized coal fuel lines Phosphate
Pulp and Paper: Bark lines Chip lines
Bauxite Lithium
Digester blow lines Hog fuel lines
Energy:
Dredging:
Lime injection lines Fly ash lines Bottom ash lines Pulverized coal fuel lines
Sand and gravel Fly ash
4
Powered by FlippingBook