ULTRA 200 PIPE
IMPROVED WEAR RESISTANCE FOR HIGH IMPACT APPLICATIONS
Standard mild steel reaches a Brinell Hardness Number (BHN) of 120 BHN. Ultra 200 abrasion-resistant steel uses a proprietary chemistry that is inherently stronger than mild steel. Our Ultra 200 pipe will come out of the mill at a nominal 220 BHN. This provides improved resistance to sliding abrasion inside the pipe yet is ductile enough on the exterior wall to withstand high impact and deformation abrasion. This improved formulation enables UT 200 to last approximately twice as long as mild steel in most applications. Ultra 200 installation will result in fewer maintenance and replacement stoppages that will save money over the lifetime of your pipeline.
220 BHN
AVAILABLE FABRICATIONS
SPECIFICATIONS Pipe type: Single Wall Abrasion Resistant Pipe size: 2.5" - 20" OD(63,5mm - 508mm)
Cut to exact lengths required Field fitment utilizing proper cutting and welding practices End attachments consisting of flanges, weld rings, and couplings Tees & Laterals Wyes & true wyes Custom fabrication available
Standard NPS: 2.5" - 20" (Other sizes available upon request); Standard and Extra Heavy Wall Thickness Pressure: 0-2900 PSI / 0-200 Bar Brinell Hardness Number (Rockwell Hardness): 220
BHN (19HRC) through entire wall Special shapes: Tees, laterals, wyes Applications: Slurry conveyance
ULTRATECHPIPE.COM | 61
Powered by FlippingBook