ULTRA DUTY 8" HIGH PRESSURE COUPLING
TOP OF THE LINE, MAXIMUM DURABILITY
NEW FEATURES Slip fit design instead of a male/female connection means there is no need to jack pipe apart to disconnect the system. Slip fit design eliminates the need for a cut groove on the pipe, providing more wear life and better pressure ratings. Exceeds the pressure rating of previous models at 2,650psi (182bar). Total weight (43.8lbs) remains below NIOSH guidelines of 51lbs for single person lifting. LEARN MORE
PRESSURE RATING, MAX END LOAD (ON UT600 PIPE) 2,650psi (182bar), 154,830lbf (688,716N)
COUPLING SIZE
COMPATIBLE PIPE SIZE
DESIGN
DESCRIPTION
PART #
Ultra Duty High Pressure
C80BBD ‐ HPF 8"
8" pipe
Slip on HD Weld End and Gasket
COMPETITOR COUPLINGS
ULTRA DUTY 8” HIGH PRESSURE COUPLING
SAFETY
Ductile forgings bend before breaking, causing
Brittle castings do not bend and can result in a violent failure mode.
pressure loss before catastrophic failure.
SAFER
EASE
Better design and manufacturing result in a more reasonable price point. Easier and faster to install due to lower weight (43.8lbs/19.9kg) and only 2 bolts.
Weighing approximately 80lbs (36.2kg) with 4 bolts, installation is cumbersome.
EASIER INSTALL
VALUE
Higher cost without added benefits.
BETTER VALUE
ULTRATECHPIPE.COM | 65
Powered by FlippingBook