Ultra Tech Pipe Product Guide

QUALITY OVERVIEW

PRODUCT SPECIFICATION

Ultra 600 Pipe and Fittings available – View Full Spec Guide for UT600 LINK NPS Pipe sizes available (2.5"-20"/65mm-500mm) Minimum tensile strength of 90,000psi (620 MPa) Minimum yield strength of 60,000psi (413 MPa) Temperature Limits: 20°F to 450°F ( ‐ 6°C to 232°C) Field fabrication welding to our specifications View Guidelines LINK

HEAT TREATMENT PROCESS

Heat qualification performed to obtain hardness profile Serial number added to each pipes for future in-field traceability Check hardness of each spool Records of serial number and run settings maintained

WELDING

Qualified per ASME Section IX – WPS/PQR Welders qualified in accordance with Section IX Production Welder stamp added for traceability

INSPECTION

NDT – magnetic particle testing Level II inspectors 100% visual and dimensional inspection Serial number, heat number, UT part number, order number, and customer name marked on each part Additional label per customer’s requirements (upon request) maintaining traceability

DOCUMENTATION (Upon Request)

Engineering drawings/specs (i.e. we work with customer on approval) Inspection (visual and magnetic particle) Raw material test reports Traceability of parts (SN, MFG Heat Number)

ULTRATECHPIPE.COM

Powered by